What is the cause of loss of light in the coating equipment?

Painting is an important part of the surface manufacturing process. Anti-rust, anti-corrosion, aesthetics and the use of the material itself are one of the important aspects of the overall quality of the product. Then, when we use the coating equipment to spray, what are the reasons for the loss of light?

The reasons for the loss of light in the painting equipment:
1. The surface of the object to be coated is moist or has acid, salt, salt and other substances.
2. Water is mixed in the paint and thinner.
3. The surface of the object to be coated is too rough, the absorption of the coating is large, and the coating is too thin.
4. The ambient humidity of the site is large, greater than 90%, and the coating is easily fading and losing light.
5. The temperature on the site is too low, the drying is too slow, and the water gathers on the surface to cause loss of light.
6. The moisture in the air compressor is not cleaned and mixed into the coating to cause lesions.
7. Excessive amount of diluent.

The reasons for the loss of light in the painting equipment are mainly the ones shared by the above. If there are problems, we can solve them in time and hope to help everyone.